0086-513-88965955
161-1-1406, (Middle) Huanghai Road, Haian County, Nantong, Jiangsu, China (Mainland)
3.5m*52m rotary kiln
1,Advanced national technologies
2,Efficiency running rate
3,High production
4,Low heat consu
Cement calcination rotary kiln| 3.5m*52m rotary kiln, Rotary kiln price
This series of rotary kiln is the large-size advanced international calcining kiln & furnace which is developed by our company and many scientific research institutes such as Beijing General Reserch Institute of Mining & metallurgy, Changsha Research Institute Of Mining & metallurgy, Suzhou Sinoma Reserch Institute of Non-metallic Mining Industry, etc. Compared with the rotary kiln with the same specification made by the traditional technology, this series of torary kiln can make the production capacity increase by 30%, make the heat consumption reduce by 40% and make the discharged flue gas temperature<250 °C , so it is convenient for collecting dust and meeting the modern environment protection needs about energy saving and consumption reducing. This rotary kiln is widely used for extracting nickel from laterite, calcining the activated limestone, oxidized pellet, magnesium oxide, aluminum oxide, titanium dioxide, etc.
The structure chracteristic of ourcompany is:
1. The rotary kiln shell design fully take into consideration of the corner at shell flexible supporting to extend the lifetime of refractory bricks and castings.
2. Adopt supporing roller bearing with big diameter and small ratio between length and diameter to improve the reliability. The bearing is automatic self-sligning bearing.
3. The better sealing effect of new type open gear hood sealing type.
4. The spring lamination overlying type lexible sealing, double layer spring lamination sealing increase the heat insulation layer to improve the reliability and lifetime.
Main technic parameter :
| technic parameter | Main reducer | The main motor | Block round form | Number of support | Weight(t) | ||||||
| Model and specification | skew angle (%) | Yield (t/h) | power(kw) | speed(r/min) | |||||||
| rotation rate (r/min) | Model | speed ratio | Model | ||||||||
| 1.9/1.6×36m | 0.53-1.59 | 4 | 2.5-3 | JZQ750-1 | 48.85 | JZT-72-4 | 30 | 1200/400 | mechanical | 3 | 53 |
| 2.1/1.8×36m | 0.5-1.51 | 4 | 4 | UT2-110 | 163.36 | JZS-81 | 30 | 1410/470 | mechanical | 3 | 75 |
| 1.2×35m | 0.5-1.6 | 3 | 1.5 | PM650 | 40.17 | JZTY71-4 | 22 | 1200/120 | mechanical | 3 | 34 |
| 1.6×32m | 0.158-0.258 | 3 | 2 | PM750 | 48.57 | JZTY61-4 | 15 | 1200/120 | mechanical | 3 | 46.82 |
| 1.8×45m | 0.66-1.98 | 4 | 3.5 | UT2-110 | 163.36 | JZS-81 | 30 | 1410/470 | mechanical | 3 | 80 |
| 2.2×50m | 0.125-1.25 | 3.5 | 4 | ZS145-11 | 157 | YCT280-4A | 30 | 1320/132 | mechanical | 3 | 130.71 |
| 2.5×50m | 0.516-1.549 | 3.5 | 5.5 | ZS165-7 | 99.96 | YCT355-4A | 55 | 1320/140 | mechanical | 3 | 167.5 |
| 3×48m | 0.3309-3.309 | 3.5 | 35 | ZI130-14 | 32.11 | ZSN4-250-21B | 90 | 1000/100 | mechanical | 3 | 237 |
| 3.2×50m | 0.398-3.975 | 3.5 | 50 | ZI130-16 | 40.85 | ZSN4-280-11B | 190 | 1500/150 | mechanical | 3 | 263 |
| 3.3×52m | 0.391-3.91 | 3.5 | 50 | ZSY500-28 | 27.707 | ZSN4-315-082 | 190 | 1000/100 | mechanical | 3 | 280.8 |
| 4×60m | 0.396-3.96 | 3.5 | 104 | ZSY630-35.5 | 34.601 | ZSN4-355-092 | 315 | 1000/100 | hydraulic | 3 | 487.5 |
| 4.2×60m | 0.4165-4.165 | 3.5 | 116 | ZSY710-35.5 | 35.526 | ZSN4-355-12 | 420 | 1000/100 | hydraulic | 3 | 576.1 |
| 4.3×62m | 0.398-3.98 | 3.5 | 125 | ZSY710-35.5 | 35.714 | ZSN4-355-12 | 420 | 1000/100 | hydraulic | 3 | 598.5 |
| 4.8×74m | 0.35-4 | 4 | 208 | JH710C-SW305-40 | 42.226 | ZSN4-400-092 | 630 | 1500/130 | hydraulic | 3 | 841 |
